Home > FAQ & Help > Overview
How to Apply Iron On Transfers
We recommend using a heat press to apply rhinestone transfers. It will ensure that even heat and pressure is applied throughout the design.

Step 1: Take off the protective foil from the tape. Check design to make sure that the rhinestones have not moved. Use tweezers to replace any that have moved out of place.

Step 2: Place the transfer motif on the required position of the cloth.

Step 3: Turn inside out and lay it on the heat press. Set the temperature and time. Required application time is completed, release the press. (Different material, please check the attached form for the press time and temperature)

Step 4: Remove the sticker from the cloth after cooling.

Step 5: Finished

Fabric Rhinestone /  Domestud / Glitter / Sequin Glitter with Rhinestones Resin Rhinestone,  Pearl, Epoxy,  Rhinestud, Nailhead,
Pressure(KG) 2.8 - 3.2 2.8 - 3.2 2.8 - 3.0
Temperature(F) 324 - 329 324 - 329 320 - 325
Time(S) 15 - 17 17 - 20 13 - 15

Tips & Warnings
* If you are going to put the transfer to heavier fabrics, press for a little more time.
* Turn inside for wash and set dryer on low to dry.